358 kVA Volvo Series Open Type Diesel Generator

Model NO.: BF-V358 Installation Method: Fixed Cooling Method: Water Cooling Speed: Speed Usage: Common Units Excitation Mode: AC Rotating Exciter Weight: 2450kg Cylinder Arrangement: 6 in Line Specification: ISO8528, GB/T2820-1997 HS Code: 85021200 Type: Basic Diesel Generator Stroke: Four Stroke Output Type: AC Three Phase Conditions of Use: Land Use Landuse Type of Unit: Low Noise Overall Size: 2950X1120X1595(mm) Fuel System: Elec. Injection, Elec. Fuel System Trademark: Baifa Power Origin: Wuxi, Jiangsu

 

MODEL	BF-V350
Standby Power(50Hz)	277KW/346KVA
Prime Power(50Hz)	252KW/315KVA

 

General Features:

Engine(VOLVO TAD1341GE)

Radiator 55ºC max, fans are driven by belt, with safety guard

24V charge alternator

Alternator: single bearing alternator IP23, insulation class H/H

Absorber

Dry type air filter, fuel filter, oil filter, pre-filter, coolant filter

Main line circuit breaker

Standard control panel

Oil drain pump

Two12V batteries, rack and cable

Ripple flex exhaust pipe, exhaust siphon, flange, muffler

User manual

 

Generator Ratings

Voltage	HZ	Phase	P.F (COS¢)	Standby Amps	Standby Ratings (KW/KVA)	Prime Ratings (KW/KVA)
254/440	50	3	0.8	454.3	277/346	252/315
240/415	50	3	0.8	481.6	277/346	252/315
230/400	50	3	0.8	499.7	277/346	252/315
220/380	50	3	0.8	526	277/346	252/315

BF - V series engine has the outstanding advantages:
1. The inline cylinder, water cooled, four stroke, closed circulating water cooling, four valves per cylinder, exhaust turbo, inter cooling, direct fuel injection, with reliable operation and the advantages of high power output with small body size.

2. Engine design make the installation simple, fast and very economic, after a good balance to make it run smoothly with no vibration, and low noise, the engine design overhaul period of more than 25000 hours for the first time.

3. The engine piston-cooling system design make the cylinder and combustion chamber in a controlled working temperature, the wet cylinder liner replacement, with fire shoulder, can make the cylinder head resistance to high temperature. Cast iron cylinder block optimizing the distribution of power, no excess weight, the whole machine in particular. Nitrogen, carbon treatment of the crankshaft and drive gear for overload operation, seven bearing on the crankshaft to reduce the load of main bearing.

4. Advanced high technology of fuel injection and low flow resistance of air intake system, make the combustion sufficient, low fuel consumption, greatly reduce the emissions, reached Europe II and III environmental standards, at the same time, greatly reduces the power loss plateau region, at an altitude of 5000 meters power reduction only by 16%. High intelligent engine management system (EDCIII and EMS2) to optimize the engine performance, better make the engine more fuel-efficient (an average of 198 g/KWH), with the same machine CAN be selectively operation in the function of the 50 hz or 60 hz, provide advanced fault diagnosis and tracking function, better protection, at the same time provides a standard CAN SAE J1939 communication interface.

Contact us if you need more details on Open Type Diesel Generator. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Volvo Opendiesel Generator、358 kVA Volvo Generator. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : BF-V Volvo series genset